Sucker rods and pony rods

Sucker rods are the primary parts of oil and gas production and available in 25- and 30-ft lengths. Pony rods are available in lengths of 2, 4, 6, 8, and 10 ft. Rods are manufactured, heat-treated, and tested at a facility that follows our stringent quality assurance procedures. The rod is threaded at both ends, allowing a tight connection. This connection joins the above-ground and down-hole components of a well together.
Below are three ways sucker rods impact oil and gas industries:
Keeping wells operational: Wells may flow naturally, but sucker rods help keep wells flowing much longer.
Mechanical lift: Sucker rods provide the mechanical lift needed to bring fluids to the surface.
Energy production: Sucker rods facilitate moving kinetic energy down the shaft, allowing the pump to work freely.
Many types of equipment and parts are used in oil and gas production. The sucker rod has one of the most vital roles in maintaining consistent production. It is the primary tool that pulls the needed fluid from the ground. Maintaining the most critical piece of equipment in the toolbox is essential to keep pumps running.
Companies understand that if wells dry up, so do their profits. If you can’t pull the natural resources out of the ground for consumers, there is no business to be had. Protecting production equipment, pipes, and threaded assets is vital to staying open for business.
Sucker rods are used in multiple artificial lift applications, including rod lift and progressing cavity pumps (PCPs). You can choose among several certified materials—depending on both the depth and corrosion level of your well—to best fit your application.
For applications in particularly harsh conditions, you can also rely on our highly corrosion- and abrasion-resistant coatings for D-Alloy (DA) and H-Alloy (HA) rods.